FARADAY PRO PRECISION SCANNING POTENTIOSTAT

Design Considerations

Host Connection - Faraday Pro connects to the host computer via the USB port. The USB serial interface engine is driven by USB power, whereas electrochemical power is generated by the main instrument power supply, reducing the amount of computer generated noise on the electrodes.

If you are new to Cyclic Voltammetry, please read this Introduction (pdf file, 10.4 MB)

User-friendly Software - The Faraday Pro system was designed for primary use in academic research laboratories. All buttons and parameter readouts are thoughtfully positioned, clearly labeled, and supplemented with tool-tips.

iR Compensation - Automated software iR compensation eliminates the need for expensive specially designed cells and high electrolyte concentrations.

Software Noise Reduction - The electronics of Faraday Pro includes selectable hardware filtering circuitry. In addition, the filtration circuitry can be bypassed, replaced by an antialiasing filter, and noise reduction can be taken over by sophisitcated Fourier transform routines in the software. Thus, the raw signal over the entire bandwidth is transmitted to the host computer eliminating any inadvertent alteration of the data due to inappropriate hardware filtering. Noise reduction and/or signal enhancement is then performed in software via signal averaging or by the Fourier transform algorithms. Hence the user has complete control over the type and amount of noise reduction, enabling even very weak signals to be safely extracted in noisy environments.

Portability - Faraday Pro interfaces with the host computer via the USB port. No additional interface cards, data acquisition cards, or special cables are required, and no hardware modifications to the computer are needed.

Electronic Specifications

Power

line

3 amp 56 VAC external module (included)

power supply

analog and logic level low-noise linear regulator

safety

overvoltage protection, current limit, thermal shutdown, short-circuit proof

operating temperature

0 - 70 °C

Electrode Drivers

 

 

 

 

 

 

 

 

 

 

counterelectrode compliance voltage

±40 V

output current

±1 A (limited)

bandwidth

100 kHz

slew rate

100 V/ms

voltage window (working to reference)

±6 V

signal to noise ratio

80 dB

drift

< 1% / year

safety features

short-circuit proof, current limited, voltage limited, thermal shutdown

linearity

R = 1.000

 

resolution

16 bits

scan speed range

DC to 100 volts/sec

Electrometer

input impedance

1015 W

input current

200 fA (max)

bandwidth

1 MHz

signal to noise ratio

80 dB

DC accuracy

61 microvolts

Current Measurement

full scale ranges

11 decades from ±100 pA to ±1 A

resolution (17 bits)

10 fA to 150 mA per bit

Interface

protocol

Full speed USB

 

Computer Requirements

 

Hardware

PentiumTM 100 MHz or higher

one unused USB port or USB hub

32 MB RAM minimum

10 MB free disk space (hard drive)

CD ROM

Software

Microsoft WindowsTM 95/98/NT or higher

Adobe Acrobat ReaderTM (included)

Faraday Pro instrument software package (included)

Software

 

Available Techniques

cyclic voltammetry, stripping voltammetry, pulse polarography, chronoamperometry, corrosion analysis, electrosynthesis and electrocrystallization

Data Analysis

CV, ASV, and pulse polarography simulation package, graphics package, convenient spreadsheet export capability

Noise Reduction

Highly sophisticated Fourier transform multipole Chebyshev filtering, and signal averaging

Updates

Version 1.1 currently available, free software updates within version 1.x upon release

 

System Information

Faraday Pro is shipped with Faraday Pro Version 1.1 software, Adobe Acrobat Reader, hardware installation manual, external power module, and cell cable. Cells, electrodes, and other accessories available at extra cost.

Warranty Information

Faraday Pro is subject to a two year limited service warranty. The host computer and computer accessories are subject to the computer vendor's warranty.

System Integration

Obbligato Objectives is a value-added reseller of Dell computer equipment, and can offer complete packages including computers, computer accessories, cells, cables, electrodes, and custom computer configurations.


All contents copyright © 1998-2005. Obbligato Objectives Inc.
Last updated : Tuesday, February 01, 2005